Security and Perimeter Fencing in Kent, WA

Our security and perimeter fencing in Kent, WA protects high value assets, restricted areas, and sensitive facilities. We design tall, tamper resistant fences with options like anti climb mesh, barbed wire, and controlled entry gates. Legendary Fence Company Kent tailors each perimeter system to your site layout and risk level.

Legendary Fence Company Kent provides professional security fence throughout Kent, WA, Washington and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 253-893-6502 or request your free quote.

Security & Perimeter Fencing in Kent, WA

Security fencing in Kent is about much more than putting a barrier in the ground. At Legendary Fence Company Kent, we design perimeter systems that match the specific risks on your property, the terrain, and the local climate. A warehouse near SE 208th needs different protection than a hillside home overlooking the valley or a school near the Green River.

We start by walking your site with you. We look at approach routes vehicles might use, blind spots where someone could enter unseen, and how your fence will interact with existing structures, parking areas, and landscaping. We also consider Kent’s wet winters and occasional windstorms, which affect post depth, material choice, and drainage.

Instead of selling a one size fits all “security fence,” we define clear goals: deter casual trespassers, slow and detect determined intruders, secure inventory or equipment, or separate public areas from restricted zones. Then we design the fence, gates, and hardware as a single system that hits those goals without overbuilding or wasting your budget.

Material Options for a True Security Fence

The right security fence for a Kent property depends on how much visibility, impact resistance, and climb resistance you need.

Chain link with security upgrades: For industrial and commercial sites, 6 to 10 foot galvanized or black vinyl coated chain link is common. We increase security by using heavier gauge mesh, smaller mesh openings, tension wire along the bottom, and, where appropriate, barbed or razor wire on top. For Kent’s damp climate, we often recommend vinyl coated fabric and fittings to reduce corrosion and extend life.

Steel or aluminum ornamental: Around offices, multi family communities, and higher end residential properties, welded steel or heavy aluminum picket fences provide security without looking industrial. We specify picket spacing that resists footholds, use tamper resistant fasteners, and can add pressed spear tops or finials for climb deterrence. Powder coated finishes hold up well in local rain and winter road spray.

Privacy and anti climb solutions: For backyards or side yards, we often combine a solid wood or composite privacy fence with security upgrades such as steel posts, metal framing on the gate, and anti sag hardware. For higher risk sites, anti climb mesh panels, double wire panels, or palisade style fencing may be recommended. We explain the tradeoffs between appearance, cost, and security so you can choose the right configuration.

How We Design a Secure Perimeter in Kent

A secure perimeter is a continuous system, not just individual panels. Legendary Fence Company Kent looks for and eliminates weaknesses that intruders commonly exploit.

We map the entire property line, including slopes, drainage swales, and easements. Any low spot that can be crawled under or high spot that can be jumped from is flagged. We adjust fence height, bury mesh, or add retaining elements so the effective height and coverage is consistent. Around creeks or drainage channels, we may use removable security panels or grates that allow water to pass yet resist entry.

Gate locations are chosen for both convenience and control. We design vehicle gates so they cannot be rammed open easily and pedestrian gates so they are visible from windows or cameras. Where needed, we integrate keypad locks, card readers, or automatic openers provided by your access control vendor, and we build the posts and frames to support that hardware long term.

We also coordinate with existing lighting and camera placements. For example, we avoid privacy panels or tall shrubs that would block camera views near Kent Valley industrial parks, and we may recommend open style ornamental fencing where natural surveillance from neighbors adds extra deterrence in residential neighborhoods.

Installation Process & What to Expect

Security fence installation is more precise than a typical backyard fence job. Our crews at Legendary Fence Company Kent follow a step by step process so your perimeter performs as designed.

1. Permits and utilities: In Kent and King County, certain fence heights and corner locations require permits or design review. We help identify when that applies. Before any digging, we call 811 to locate underground utilities so fence posts do not damage gas, water, or communications lines.

2. Layout and staking: We stake post centers with string lines and check corners for square and straight sightlines. On irregular Kent lots, especially on hills or near older property lines, we often recommend a survey to avoid encroachment issues.

3. Post installation: For security fences we typically use larger diameter posts and deeper concrete footings than a standard fence, often 30 to 42 inches deep depending on fence height, soil type, and wind exposure. Kent’s wet winters mean we pay close attention to drainage around post holes and ensure concrete is properly crowned so water sheds away.

4. Panels, mesh, and hardware: We stretch chain link with proper tension to prevent sagging and cut panels to follow the grade while keeping gaps tight. For ornamental or privacy materials, we use security screws and heavy duty brackets. Gates are hung and adjusted so they latch smoothly but cannot be lifted off their hinges.

5. Final inspection and walk through: We test each gate, check for gaps, and verify that any specified security upgrades (barbed wire, bottom rail, buried mesh, or anti climb features) are correctly installed before we consider the job finished.

Common Security Fence Issues and How We Prevent Them

If you already have a perimeter fence in Kent, you may have seen typical failure points. Legendary Fence Company Kent designs new systems specifically to avoid these problems.

Sagging or easy to lift gates: This often happens when gates are mounted to undersized posts or use light duty hinges. We use larger posts, set deeper in concrete, with adjustable, greasable hinges rated for the gate width and weight. We also use latch systems that cannot simply be reached over from the outside for security applications.

Gaps under the fence: Uneven ground can leave openings that people or animals exploit. Instead of stepping panels, we often use a combination of racking panels to follow the slope, adding bottom rail or tension wire, and in some cases burying a portion of the mesh or adding a narrow concrete mow strip to close gaps.

Corrosion and damage from Kent’s weather: In our climate, unprotected steel rusts quickly near the ground, especially along roads that get winter deicing. We recommend hot dip galvanized or powder coated components, we avoid exposing raw cuts, and we seal or cap posts. Where mowers or plows may impact the fence, we reinforce corners and high risk sections or use bollards to protect them.

Unsecured transition points: Security fences often fail where they meet a building or retaining wall. We use specialty anchors and plates to tie the fence solidly into structures, and we custom fabricate panels for tight, odd shaped areas so there are no unintended entry points.

Cost Drivers for Security & Perimeter Fencing

Security fencing costs more than decorative or basic boundary fences because of heavier materials, deeper footings, and upgraded hardware. Legendary Fence Company Kent is transparent about what drives pricing so you can prioritize where it makes the most sense to invest.

Key factors include:

Fence height and length: Taller fences use more material and need stronger posts and more concrete. Long property lines, such as commercial lots off Kent Kangley Road or industrial yards in the Kent Valley, benefit from economical solutions like reinforced chain link, while shorter, higher visibility frontages may justify ornamental steel.

Material choice and coatings: Galvanized chain link is typically the most cost effective, with vinyl coated chain link, ornamental steel, and composite or steel privacy systems increasing in cost. However, better coatings can lower lifetime ownership costs by resisting rust and reducing repairs.

Terrain and access: Steep slopes, heavy clay soil, and tight access between buildings or along wetlands all add labor. In Kent, we often deal with saturated soils, so we may need to remove and replace poor soil around post locations, which affects the budget but significantly improves stability.

Security upgrades: Barbed or razor wire, buried mesh, anti climb panels, custom security gates, and integration with access control systems all add to the overall project cost. We help you identify where these upgrades provide real value and where standard solutions are adequate so you do not overspend where it is not needed.

We provide detailed written estimates that break down materials, labor, and optional upgrades so there are no surprises once work begins.

Why Kent Property Owners Choose Legendary Fence Company Kent

When the goal is protecting people, equipment, or inventory, experience matters. Legendary Fence Company Kent focuses on building security and perimeter fencing that holds up in real conditions and real attempts at entry.

Local knowledge: We work throughout Kent, from older neighborhoods with existing wood fences that need upgrading, to new commercial builds in the Kent Valley that require high security perimeters. We understand local enforcement of height limits and what nearby properties are using for effective security.

Security focused craftsmanship: Our crews are trained to think like an intruder while they build. They know to reinforce terminal posts, double check gate latch alignment, close off gaps at grade changes, and protect hardware from tampering. These details are what separate a true security fence from a basic enclosure.

Clear communication: From the first site visit through final walk through, we explain options in practical terms, not just product names. We talk through what each feature actually does in a Kent setting, how long it should last, and what maintenance will look like over the years.

If you are considering a new security fence or upgrading an existing perimeter in Kent, WA, we can evaluate your property, provide specific recommendations, and install a system that matches your real world security needs and budget.